If your Heat Storm heater stops working, you may be wondering what’s wrong and how to fix it. Fortunately, we have the information to help you.
The following factors can cause your Heat Storm heater to malfunction:
- Thermostat Defect
- Inadequate maintenance
- Air filter clog
- Wires with flaws
There is a solution to every problem. Complex cases, on the other hand, necessitate the use of a professional. Continue reading to learn how to repair a broken Heat Storm heater.
What Is The Problem With My Heat Storm Heater?
If your Heat Storm heater stops working, it could be due to one of the following:
If your Heat Storm heater isn’t working properly, the issue could be with your thermostat. The signal from the thermostat may not be reaching the heater.
The problems can range from as simple as dead batteries to as complex as a broken thermostat. All of these issues could contribute to your Heat Storm heater malfunctioning.
One of the most common reasons Heat Storm heaters don’t work, especially in the winter, is a lack of regular maintenance. If your heater isn’t working, it could be because you haven’t turned it on yet.
Heating system problems are frequently caused by simple dirt buildup and maintenance issues.
It is critical to keep the heater in good working order. Heat Storm heater components, like those of other devices, eventually wear out. Failure to maintain your heater on a regular basis could cause serious problems or even render it inoperable.
Lack of maintenance can cause it to wear out prematurely, compromising the reliability of its components. Regular maintenance reduces the likelihood of failure. Furthermore, repairing minor issues as soon as they are discovered prevents the device from developing into more serious issues.
Air Filter Clog
When your air filter becomes clogged, it restricts airflow throughout your home and reduces the effectiveness of your Heat Storm heater. The heat exchanger may deactivate if it reaches an unsafe temperature in your heater without fresh air.
Dirty filters make it more difficult to heat your space effectively by causing short cycling issues. As a result, the air quality in your home may suffer.
Dust and debris circulate as a result of your forced-air system’s recycling of air. These particles have the potential to aggravate pre-existing respiratory and asthmatic conditions in people who already have them.
Wires With Flaws
Heat Storm heaters may not work properly due to wiring problems. If any of the wires in the system have frayed ends, are loosely attached, or are simply worn from age, the thermostat may lose its connection to the heating system.
Fortunately, the vast majority of wiring accidents can be avoided by performing routine checks for faulty wiring and repairing it before a major problem arises.
If you suspect a wiring issue, contact an HVAC professional as soon as possible.
What Should I Do If My Heat Storm Heater Doesn’t Work?
To repair your Heat Storm heater, do the following:
Change The Thermostat
If you discover that your thermostat is faulty and is the cause of your heater not working, consider replacing it. A programmable thermostat allows you to set different temperatures for the day, night, and week.
In terms of energy efficiency, these programmable thermostats outperform their non-programmable counterparts significantly.
The issue is sometimes caused by incorrect thermostat programming on your end. It’s also possible that you unintentionally reprogrammed it. Check to see if the thermostat has been properly set before replacing it.
Examine For Electrical Problems
Check for any electrical or wiring problems. Check that none of the power cords are damaged. Replace any worn-out power cords. If the circuit breaker trips repeatedly, you must either replace it or connect the device to a different outlet.
If you come across any frayed wiring, the first thing you should do is turn off the power. Then, if possible, secure any loose wires and replace them.
Replace Your Air Filter
Filter clogging is caused by dirt accumulation in the filters. Because of this buildup, the airflow through your heater is reduced. It would be beneficial if you replaced any filters every 90 days to avoid clogging.
The simplest way to ensure that your heater lasts a long time and continues to function properly is to schedule routine maintenance, which includes cleaning the air filter.
Contact A Professional
If none of the solutions above solve the problem, it is time to consult an expert. An expert may be required to diagnose and address any issues with the heater. However, knowing how to deal with the problem can help you save money.
What Is The Process Of Resetting A Heat Storm Heater?
Some circumstances may necessitate a restart. If your Heat Storm heater isn’t working properly, for example, you may need to reset the thermostat.
The method you use to reset your thermostat is entirely dependent on the type of thermostat you own. To restart your heater, follow these steps:
- Turn off the thermostat as well as the circuit breaker.
- After thirty seconds, turn the breaker back on and adjust the thermostat temperature.
- Set the thermostat to your preferred warm or cool temperature.
How Much Power Does A Heat Storm Heater Consume?
To make an accurate energy consumption forecast, please consider the wattage, kilowatt-hours, rate, and other factors of a Heat Storm heater.
The Heat Storm heater is energy efficient and quickly brings the room temperature up to a comfortable level because it uses Heat Storm’s HMS dual-wall technology.
A Heat Storm heater consumes approximately 1500 watts of electricity per hour when used to warm a space of average dimensions over the course of a day.
Many other items in the home use the same amount of power, or even more than 1500 watts, so the heater’s energy requirements are reasonable.
What Is Causing My Heat Storm Heater To Overheat?
When used after a while, the Heat Storm heater tends to overheat. One of the most common and obvious causes of a Heat Storm heater overheating is a lack of adequate air circulation. To avoid this issue, make sure the room where the heater is located has adequate ventilation.
Insufficient airflow puts the components inside your heater at risk of overheating. To resolve this issue, turn off the heater. Allow 5-10 minutes for it to cool. Then, to connect the device to the socket, press the power button. Then, re-start the heater.
Is It Permissible To Use More Than One Heater At The Same Time?
Yes, you can use multiple heaters at the same time. Every single heater, however, must be wired in parallel.
You can connect each heater directly to the thermostat or link them together. Whatever method you use, make certain that each heater is connected to the source wires.
If your Heat Storm heater is not working properly, it could be due to a faulty thermostat, poor maintenance, a clogged air filter, or faulty wires. To address the issue, you must replace the thermostat, check for electrical problems, and clean dirty filters. Feel free to contact a professional if you require assistance.