Despite keeping up with modern technology, electric furnaces require upkeep. Don’t worry if you’re unsure of how to clean them. We conducted extensive study to find advice and tactics for keeping electric furnaces hygienic and safe for daily usage.
You must set up your cleaning supplies and instruments before beginning to clean an electric furnace. When everything is ready, you can start putting these steps into practice:
- Make sure the switch for the furnace is off.
- If required, check and clean your filter.
- Dust and vacuum the inside.
- Examine the wirings and belt.
- Check and clean the heat registers and the blower fan.
- Switch on the electricity and take in the sound of the furnace.
- Offset the power.
The time required to clean a furnace is not that long. How thoroughly and gently you cleaned it is now evident by what is left of it. Cleaning some components requires extra caution, so take your time and be thorough. Continue reading as we discuss how to clean and what safety measures to take to maintain order.
How Is An Electric Furnace Cleaned?
You won’t have to spend a lot of time cleaning the furnace. It’s simple and won’t make you fuss over trivial details. Only a vacuum, a soft-bristle brush, and compressed air are required.
Everything benefits greatly from being kept clean. It restores your machine to full functionality and increases its lifespan.
Seven simple procedures to cleaning an electric furnace are listed below:
- Before you turn on your furnace, make sure to turn off the electricity. If too much dirt builds up on your filter, check it and clean it. The efficiency of the electric furnace is decreased by a dirty filter.
- When your furnace’s filter is clean, unscrew the doors and open it to look inside first. Some filters slip down easily since they don’t require bolts.
- Start by cleaning the furnace. Clean off any necessary dirt from the wires and other parts. Check for loose wires and, if necessary, rewire them to their original locations.
- After cleaning dust from your circuit board and other tight spaces, use compressed air. Although you don’t have to follow a rigorous cleaning schedule, cleaning it will prevent needless harm. It also protects you from breathing air of poor quality, which poses health dangers.
- Your fan should be cleaned. Before dusting them with a gentle brush, inspect the interior and the reverse. You can avoid long-term issues with your electric furnace by keeping your blowers clean.
- Once finished, turn on the power and let your furnace start up. A good, functioning furnace doesn’t make a loud, unpleasant screaming noise.
- Once everything has been cleaned and examined, shut off your furnace, and you’re done.
Are Electric Furnaces Cleaned Regularly?
Yes, cleaning is necessary for electric furnaces. Even though it’s possible that electric furnaces pose less of a threat than gas furnaces, we are nonetheless subject to risks and hazards. Whether done by HVAC professionals or you do it yourself, all machines and equipment need maintenance and servicing.
All-electric furnaces typically undergo annual maintenance since they need to be kept in good condition. You will not only be kept secure, but you will also avoid paying for pointless service repairs and replacements.
Unclean Furnaces’ Risks
Failure to keep your furnace clean could put your finances and health at danger. Filters will become clogged with a buildup of dirt and debris, which could lead to the system overheating. One danger inevitably leads to another.
The terrible thing about clogged filters is that they overused their parts to make up for the blocked airflow. The damage could get worse quickly, and as additional furnace compartments deteriorate they may need to be repaired or replaced.
You already run the risk of your home’s air being of poor quality if your filters are unclean. Dust accumulation results from the re-filtering of what is filtered out within. People with asthma and other similar respiratory illnesses are subject to chronic harm from it.
How Much Will It Cost To Maintain Your Furnace?
Make sure you are aware of your equipment’s warranty and the duration of the maintenance service if you decide to buy an electric furnace. Consult your manufacturer to learn about additional costs that are not covered by their yearly inspection and cleaning.
An typical furnace inspection costs between $100 and $300; if the ducts also need to be cleaned, the cost rises to between $275 and $500. Depending on the brand, replacing a filter will generally cost between $10 and $30.
Can An Electric Furnace Replace A Gas Furnace?
Your gas furnace can be replaced with an electric furnace. The advantages increase as soon as you choose to replace your gas furnace. One of which is the amount of room it takes up. A gas furnace requires a lot of room because it has a boiler and pipelines.
Switching from a gas furnace to an electric one has several benefits. Electric fireplaces don’t need a lot of maintenance. There won’t be any potential gas leaks, and your home and you will both be safer. There are places in the nation where access to power is greater than to gas, saving thousands of dollars.
Since gas furnace ductwork can still be used with electric furnaces, switching to an electric furnace is typically feasible. However, before making the choice, verify with your service provider first because doing so could end up costing you far more money in new replacements.
What Is The Lifespan Of An Electric Furnace?
The lifespan of your equipment is affected by how well you use and maintain your furnace. It might survive longer than predicted with the right care, upkeep, and use. Finding out just how long your furnace can survive, though, is also helpful.
The lifespan of your furnace is between 20 and 30 years, depending on the type. Gas furnaces typically last half as long as electric furnaces.
Do Electric Furnaces Cost a Lot?
Your budget will need to be adjusted because an electric furnace runs on energy. Gas may not be very readily available in some areas of the nation, but electricity costs money to use as well. Positively, the price may vary depending on your location, the type of unit you have, the size of your house, and the price of your power.
A gas furnace may cost you $1,800 a year to use, compared to an average annual cost of $2,600 for an electric furnace. However, gas furnaces frequently need expensive maintenance and repairs. Additionally, they last less time than electric furnaces do.
It is simple to hire specialists or professionals to clean furnaces. Even though it can cost extra, you know your furnace is in good hands. You can do it yourself if you’re a handyman, but since there’s no room for error, make sure you do it correctly.
An added benefit is knowing how to clean your furnace. Both time and money are saved. Never forget to check your furnace’s delicate areas before performing a clean-up. Because it’s an investment, your furnace needs regular maintenance.