How To Set The Temperature On A Lasko Ceramic Heater

A Lasko ceramic heater can assist you in maintaining the desired temperature in your home, especially during the cold season. However, how do you control the temperature of this heater? We researched the subject to provide you with the information you require.

Temperature control on a Lasko ceramic heater is simple. After plugging it in, simply follow these steps to get started:

• Turn on the heat.
• To change the temperature settings on your heater, press the plus (+) or minus (-) buttons.
• Wait several times for the temperature you set to flash.

Don’t worry if you’re still unsure what to do. In this post, we will go over the previous steps in greater detail. In addition, we will provide instructions on how to change the temperature display on your Lasko from Celsius to Fahrenheit or vice versa. Continue reading to find out more.

How To Change The Temperature Of A Lasko Ceramic Heater

You should experiment with different Lasko ceramic heater settings depending on the season. For example, in the winter, you should set the temperature higher and lower in the summer.

Here’s how to adjust the temperature of the heater:

• Turn on the heat. After plugging in your device, listen for a beeping sound (this indicates that your unit is turned on), then press the power button.
• Adjust the temperature by pressing the plus (+) or minus (-) buttons on your heater. When you turn on a Lasko ceramic heater, it automatically switches to high heat. So, to increase the heat, click the plus button, and to decrease it, click the minus button.
• Wait several times for the temperature you set to flash. The display of your heater will show the temperature you set before displaying the current temperature of the room. After a while, if the temperature in your room is two degrees higher than you’ve set, the device will shut down. If the temperature falls below the desired level, it will turn back on.

How To Change The Temperature Display On Your Heater From Celsius To Fahrenheit

To change the temperature display on your Lasko heater from Celsius to Fahrenheit, press the plus (+) and minus (-) buttons at the same time. Your display should then change from Celsius to Fahrenheit.

It’s worth noting that the same method applies when switching from Fahrenheit to Celsius.

What Temperature Should Your Heater Be Set To?

Although you may have a specific temperature in mind for your heater, it is best to keep it close to the recommended setting for your home. You can save energy by keeping your house temperature between 70°F and 78°F.

During the winter, however, temperatures between 68°F and 72°F are acceptable. Most people believe that raising the temperature range will help keep their homes warm, but this is not necessary because the more heat there is in your home, the faster it will be released outside.

Troubleshooting A Lasko Ceramic Heater

A Lasko ceramic heater that isn’t heating a room or isn’t working can be very inconvenient. However, before contacting your manufacturer or a technician, try troubleshooting it first because the issue could be minor.

Here are some methods for troubleshooting your ceramic heater:

Check To See If Your Heater Is Turned On
Check that the heater is plugged into an electrical outlet. You may also have forgotten to fully insert it into the outlet, resulting in the unit failing to heat your room.

Examine For A Faulty Outlet
If you have already ensured that your device is fully plugged in, the problem could be a faulty outlet. Check for this by plugging in another device into the same outlet. If the appliance turns on, your heater may be experiencing other problems. If it doesn’t, simply plug your heater into another outlet and you’ll be fine.

Examine Your Circuit Breaker
The heater’s circuit breaker may have tripped or a fuse may have blown. You’ll need to reset a tripped circuit breaker or replace a blown fuse. Then try again to turn on your heater.

Examine Your Temperature Settings
When a Lasko ceramic heater reaches the temperature you specify, it automatically turns off. Your heater will only restart if your room cools below the temperature you’ve set. Set the heater to a higher temperature if this occurs and you want the room to be warmer.

Your Heater Should Be Cleaned
If your unit is dirty, it will cycle on and off every few minutes, making your room colder than you prefer.

To clean the heater, follow these steps:

• Turn off the heater.
• Connect a brush to the hose of your vacuum cleaner.
• Clean the surface of your heater with a vacuum.
• For buildup that the vacuum cannot remove, use a toothbrush.
• Wipe the unit down with a clean, soft cloth.

Determine Whether Or Not Your Heater Is Overheating

Thermal overload may occur with Lasko ceramic heaters. If this occurs, the unit will automatically shut down to cool down. Unplug it for 10 to 15 minutes before re-plugging it.

Is There A Warranty For Lasko Ceramic Heaters?

Lasko typically provides a one-year warranty on its products. A three-year warranty is included with many of their ceramic heaters. The warranty should cover manufacturing defects as long as you have your receipt. Lasko then offers a repair or replacement for your heater’s faulty parts.

However, their warranty excludes user-caused damage to the product, such as:

• Incorrect heater usage.
• There was some shipping damage.
• Damage caused by unauthorized heater repair.

Is It Safe To Leave A Lasko Ceramic Heater Running All The Time?

Lasko does not recommend that users leave their ceramic heaters running overnight or unattended. Although ceramic heaters have a plastic covering that helps them stay cool while running, it is generally safer to turn them off.

If you leave the heater on while no one is home or sleeping, it could overheat and catch fire. Even though the chances of a ceramic heater catching fire are lower, it is critical to be cautious.

Also, if the heater is left unattended, a short circuit may occur, so turning it down isn’t the best option.

How Much Power Does The Lasko Ceramic Heater Consume?

Lasko ceramic heaters typically use 750 to 1500 watts, depending on the temperature you set.

The device consumes 750 watts at low heat and costs $2.52 per hour. It can use up to 1000 watts on a low setting and costs $3.36 per hour on average. It can reach 1,500 watts under high heat and costs $5.04 per hour on average.

You don’t have to worry about the price increasing multiple times because Lasko does not recommend running your heater 24/7. Rather, you can calculate the average cost of running the heater by keeping track of how many hours you use it.

Conclusion

Because a Lasko ceramic heater is simple to use, you should have no trouble adjusting its temperature. To begin, plug in your device and turn it on. Then, adjust the temperature by pressing the minus (-) or plus (+) buttons until you see the temperature you want displayed.

You’re finished when the temperature display flashes the desired temperature. If your unit is showing Celsius and you want to change it to Fahrenheit or vice versa, press the plus and minus buttons together.