Toe Kick Heater Not Blowing: Why And How To Fix It?

As a homeowner, you may be wondering why your toe kick heater isn’t blowing and how to fix it. Fortunately, we did some research for you, and here is what we discovered.

A dirty air filter, an incorrect thermostat setting, or a faulty heater core can all cause a toe kick heater not to blow. You can address the problem by doing the following:

• Alter the filter
• Change the thermostat settings.
• Examine the breaker
• Request professional assistance.

You should address the issue as soon as possible so that it does not worsen. Continue reading for more information on what to do if your toe kick heater fails.

Why Isn’t My Toe Kick Heater Blowing Hot Air?

Some of the possible causes of your toe kick heater not blowing are as follows:

Filter Is Filthy
The purpose of an air filter is to keep dirt and debris out of the heater, such as dust and lint. This aids in the preservation of the heater’s internal working components.

The air filter can become clogged with contaminants over time, preventing air from passing through. If the heated air inside your heater cannot escape, the system will eventually overheat and shut down to prevent further damage.

Incorrect Thermostat Configuration
If your home’s toe kick heater isn’t working properly, the first place to look is the thermostat. When the seasons change from summer to autumn and you turn on your toe kick heater for the first time, you may forget to adjust the thermostat temperature appropriately.

If you can feel the heater working but it isn’t blowing hot air, the thermostat may be set incorrectly.

Heater Core Defect
Problems with the heater core are frequently associated with problems with the toe kick heater. The coolant may not be moving effectively through the heater core, but the air from the blower motor may not be reaching it, or there may be a clog in the heater core’s small tubing.

Heater cores are cooling system components that look like miniature radiators. When there is a problem with the heater core, the heater may stop working.

Electrical Issue
The problem could also be caused by electrical problems. If this is the case, the safety feature on your toe kick heater will disconnect the power, rendering it inoperable.

If your heater isn’t working properly, it’s possible that the auxiliary heat strips aren’t working properly, causing your home to be uncomfortably cold. There may be times when the electrical system requires the assistance of an electrician.

What Should You Do If Your Toe Kick Heater Isn’t Blowing?

Before calling an expert, try the following solutions to see if they can get your heater up and running again:

Change The Thermostat Settings
If the air from your toe kick heater is not coming out, the first thing you should do is check the thermostat. In most cases, the thermostat is the root of the problem.

Simply change the fan setting on the thermostat to “Auto,” and you should notice warm air blowing into the room.

Alter The Filter
Because air filters typically trap dust in your home, they must be changed on a regular basis. If the device is operational but there is no heat, the filter should be replaced.

It is recommended that you inspect toe kick heater filters once a month and replace flat filters once a month. A pleated filter has a three-month average lifespan.

Examine The Breaker
All heaters, whether they run on gas, oil, or electricity, require an electrical connection to function.

That is why a tripped breaker can leave you in the cold because it can shut down the entire system. Fortunately, there is a straightforward solution to this issue. Frequent circuit breaker trips may indicate an electrical problem that should be investigated.

Request Professional Assistance
If you have checked all of the above and the problems persist, it is time to seek professional assistance. You can get in touch with a local heating and ventilation repair service. They have the necessary information and tools to diagnose your toe kick heater and detect any problems with the device.

What Exactly Is A Toe Kick Heater?

Toe kick heaters are small electrical units that keep your home warm in the winter. It is mostly used in rooms with complicated layouts.

Most toe kick heaters are self-contained units that heat a space with hydraulic or electrical elements. Toe kick heaters are classified into two types: hydraulic and electric.

What Is The Function Of A Toe Kick Heater?

Understanding how a toe kick heater works can help you better understand the factors that may cause it to fail.

Because the heater draws heat from the water heater, installing a hydraulic toe kick heater necessitates the purchase of a water heater. Before reaching the incoming air, the hot water from the boiler will pass through a heated coil.

The fan inside the device will then blow air out, removing the extra heat in the room. Consider it steam heat because it involves both water and heat.

Electric toe kick heaters heat the air directly with electricity. As a result, they are a more efficient option. Electric toe kick heaters are less expensive than hydronic units because they do not require a pre-installed water heater to function.

During operation, electricity is circulated through the heater’s heating element. This uses electrical resistance to generate heat. As the element warms up, heat energy is transferred to the core and then through the heater’s casing.

How Much Power Does A Toe Kick Heater Draw?

Most electric toe warmers designed for home use require approximately 1,500 watts per hour of power. Every hour, this generates approximately 5,000 British thermal units (BTUs) of heat.

The amperage capacity of the toe kick heater is 12.5 amps. The heater generates enough heat for a small room if the space has a low ceiling, is properly insulated, and is airtight.

How Much Is A Toe Kick Heater?

A toe kick heater can cost between $420 and $1,300 with installation, but the device alone can cost between $175 and $430. Toe kick heaters are efficient space savers that are commonly installed to provide additional floor-level heat when needed.

Where Would You Put A Toe Kick Heater?

Toe kick heaters are intended to be installed in kick spaces around the house, such as beneath cabinets, vanities, and stairwells. They supply warm, moderate heat.

On a chilly morning, use these small heaters to keep your feet warm while standing at the counter to pour a cup of coffee or working at the counter.

How Loud Are Toe Kick Heaters?

Toe kick heaters are not noisy. Because of the small number of moving parts in the system, these space-saving heaters often produce little noise. Clanking or clattering noises, on the other hand, can indicate vibrations or poor installation.

If your toe kick heater begins to make noise, it means something is wrong with the system. To solve the problem, you must first perform basic troubleshooting.

Conclusion

If your toe kick heater is not blowing, you should change the filter, adjust the thermostat, and check the breaker. However, if you have already tried these solutions and your heater is still not blowing, you should seek the assistance of an HVAC professional.