Do you need to have your HVAC system inspected? After all, your system may only be a year or two old. Your HVAC system appears to be in fine operating order, even if it is several years old.
On the other hand, HVAC systems necessitate routine maintenance. Consider the following scenario: you’ve just acquired a brand-new car. You invested a substantial sum of money in it. Would you ignore routine inspections and any necessary service maintenance? Almost certainly not. If your automobile is older and you want to keep it on the road and running smoothly for as long as possible, regular maintenance and examinations are required.
It’s the same with a heating and cooling system. If you bought a newer heating or cooling system, you want to make sure it’s working properly and that you’re receiving good value for your money. If your HVAC system is approaching the end of its 10- to 15-year typical lifespan and you have no plans to replace it, it is critical to have it serviced on a regular basis.
Checklist for HVAC Preventive Maintenance
If you have a single unit that cools and heats your home, schedule maintenance twice a year, once in the spring and once in the fall, before switching the systems from one usage to the other. If you have a separate cooling system, you should have it serviced in the spring, while the best time to have your furnace checked is in the fall.
Several criteria will determine the type of monthly maintenance plan you require:
- The age of your air conditioning system
- The state of your heating and cooling system
- The size of your air conditioning system
- Your HVAC system’s model or brand
- How frequently you utilize your HVAC system
- Where you reside
Spring/Summer Maintenance Guide
- Modify the filters.
- Clean the coils in the condenser and evaporator.
- To guarantee appropriate drainage, remove any obstacles and clean the drain lines.
- To avoid overflowing, remove any standing water from drain pans.
- All worn belts and pulleys should be replaced.
- Inspect the ductwork for dust, mold, or debris.
- Examine the charge of refrigerant and any potential leaks.
- Ensure that the thermostats and controls are properly set.
- If required, replace the batteries.
- Examine the electrical connections and system.
- Make sure the fan motor is operational.
The items on the list above will get your air conditioner up and running in time for warmer weather. Depending on whether you use the same system to heat and cool your home or whether you have a furnace, winter preventative maintenance can include many comparable tests or be wholly different.
Guide to Fall/Winter Maintenance
- Every 30 to 90 days, replace the filters.
- Examine the burner ignition assembly.
- Thoroughly inspect the heating components or heat exchanger. If these are injured, carbon monoxide problems may emerge.
- Verify that the flue system is firmly linked to the furnace.
- Examine the gas pressure.
- Any worn belts or pulleys should be replaced.
Remember that these items may vary depending on the factors listed above. These lists, on the other hand, can help you figure out what to look for in a preventive maintenance agreement.
Guide to HVAC Maintenance
While you should have a qualified HVAC expert inspect your system every spring and autumn, there are several things you can do to assist keep your HVAC system running efficiently and smoothly throughout the year. Here are some HVAC maintenance suggestions to keep you cool in the summer and toasty in the winter.
1. Use Quality Filters
As previously stated, your filters should be changed every 30 to 90 days. Many individuals don’t do this, which is surprising. A clean filter improves the efficiency of your HVAC system significantly. Filters that are dirty make your equipment work considerably harder to keep your home at the desired temperature. Purchasing a new filter every month may appear costly, but you will save money on your energy bills many times over.
2. Clear The Area Around The Exterior Units of Any Debris
Around an outdoor HVAC unit, debris can quickly gather. Leaves fall in the autumn, pollen fly in the spring, and before you realize it, everything has piled around your HVAC unit. Ensure that any air conditioning or HVAC heat pump has at least two feet of clearance around it by inspecting it on a regular basis. This requires removing leaves, twigs, dirt, and pollen from the area around or on top of the unit. When cutting grass in the summer, ensure sure the lawnmower doesn’t fling clippings onto the unit.
3. Monthly Inspection of Refrigerant Lines
The refrigerant lines that run from your HVAC unit into your home ensure that you have the necessary heating or cooling. You won’t receive the comfortable temperatures you and your family want if those lines grow damaged, leak, or become detached. Check these lines at least once a month, even in the cold.
4. Keep a Level Unit
If you want your HVAC system to work effectively, make sure it is level and not inclined. Every two or three months, make sure your unit is level on the ground. Check that your pads haven’t shifted if you’ve set up your system on them.
5. Clogs Must Go
This is a fantastic do-it-yourself solution for preventing mold and algae accumulation in your system. To wipe up any accumulation, mix one cup of bleach with one cup of water and pour it down the air conditioner condenser drain once a year.
These are a few things you can do to make sure your HVAC system is in good working order. If you detect any specific issues, inform your HVAC expert when they come to do your spring or autumn preventative maintenance check.