in , , ,

11 Types Of Heating Systems: What You Need To Know

11 Types Of Heating Systems: What You Need To Know

Heating systems improve our daily life, from enjoying hot showers to being warm and cozy throughout the winter. The need for a quality heating system increases dramatically with home size. You may add a variety of heating systems to your house to increase comfort, and we’ve done the research on them all for you.

Understanding each system’s advantages and disadvantages is the first step in improving the interior climate in your home. Here are several systems to be aware of:

  1. Furnace
  2. HVAC unit
  3. Ductless Mini Splits
  4. Radiant heating in boilers
  5. Radiant Electric Heat
  6. Sunlight Heating
  7. Interior heating
  8. heated water
  9. Gravity Air Furnace
  10. Heating with Electric Resistance
  11. Fireplaces

Every system has unique benefits, disadvantages, and operating frameworks. You should consider whether you can maintain them and whether they fit into your lifestyle before putting them around your home. For additional information on each heating system, continue reading below.

Types Of Heating Systems

Regular broilers, system broilers, and combination boilers are the three main categories of heating systems.

1. Furnace

11 Types Of Heating Systems: What You Need To Know

Electricity, induction, natural gas, or oil are all acceptable fuel sources for furnaces. Utilizing a blower fan to pump hot air out onto the ducts that round your property, they disperse it throughout the house.

One of the most effective heating systems frequently used in houses is the furnace. Some furnaces use lighter heat exchangers, which improves the efficiency and effectiveness of heat transfer.

Modern furnaces are the only ones with sealed combustion chambers, which better regulate air and prevent heat loss.

Get a two-stage heating system if you want a more effective setup. This will allow you to regulate the heat output during erratic weather.

If you want a furnace, be prepared to spend between $3,000 and $7,000 in addition to labor fees.

2. Heat Pump

Heat pumps circulate warm or cool air throughout your house using the same process as air conditioners. The heat pump draws in the chilly air from outside and circulates heated air inside if you need it.

In contrast, heat pumps may pull in heated outdoor air and cool it down, which can then be spread throughout your home. This type of heat pump works by transferring air from one room to another.

Costs for air-to-air heat pumps range from $2000 to $5,000 per unit. The cost of installation will increase by 50%.

Electricity is used by heat pumps to change and distribute air, making them a more energy-efficient option than furnaces. Three types of heat pumps are available: geothermal, water source, and air to air.

  • On the other side, geothermal heat pumps move heat from your home to the ground below.
  • They both rely on a nearby water source, which the heat pump transforms into hot or cool air. Water sources are similar.

Costs for geothermal heat pumps range from $3,000 to $6,000. Installation charges range from $1,000 to $30,000, making them more expensive than the unit itself.

3. Ductless Mini-Splits

11 Types Of Heating Systems: What You Need To Know

One kind of heat pump is the ductless mini-split. With the exception that the mechanism may be turned around to disperse either hot or cool air, they function just like an air conditioner.

This is the best option if you want to improve the environment inside your home but don’t want ducts running through your walls. They accommodate all temperature demands and are more energy-efficient.

Zone heating and cooling are also effective with mini-splits. This implies that if each room has a mini-split, you may adjust the temperature in each one to suit your tastes.

Mini-splits have the disadvantage of having high installation and purchase costs. The energy you will save once it is operating, however, will more than make up for this.

Mini-splits range in price from $1,000 to $3,500 per unit, plus $500 to $1,500 for installation.

4. Radiant Heating In Boilers

If you live somewhere with hard winters, radiant floor heating is one of the most important heating systems you should have. Radiant heat from boiler heaters is transferred to the baseboard heater, radiators, and waterlines.

They are among the first types of heating systems, and some homes can now access them. They ensure maximum comfort by making your house feel evenly warm with no chilly patches.

Every crevice and area of the floor is warmly lit by radiant heating. Since the heat panels are dispersed throughout the space and do not restart their heating cycle, which is a common problem with forced-air systems, radiant heating is more reliable than other heating methods.

Radiant floor heating installation would cost between $6,000 and $9,000.

5. Radiant Electric Heat

Electric radiant heating establishes a network that may continuously supply heat beneath the floor using electric cables or other efficient conductors. You may adjust heating on-demand and to suit your needs; for example, you can set a timer or regulate the temperature in particular rooms.

The potential energy expenses associated with this heating technology are one disadvantage. Since the heat supply is inefficient, they are likewise less efficient than boiler heating systems.

You must assess your options and choose which one will be worth the cost in the long term because they are simpler and less expensive to install.

Electric radiant heat only costs $8 to $15 per square foot to install and buy.

6. Sunlight Heating

You can add solar heating to your heating system as a more environmentally friendly and sustainable energy source.

They warm the water that is delivered to your home by a boiler or heat pump using solar thermal energy. In order to be effective, solar heating is typically only one component of a larger heating system.

Installing solar heating would cost between $3,500 and $6,000.

7. Interior Heating

Infrared or convection are used by space heaters to spread heat around a certain room in your house. Despite being simpler to use, they cannot be used to heat huge areas.

Small rooms and apartments benefit from the efficiency and affordability of space heaters. They are especially useful in crises because they may be utilized right away and don’t need to be installed.

Space heaters need to be tended to, so as convenient as they may be, you can’t really unwind in the warmth. Because you don’t want it to overheat and catch fire, you need to be aware of its temperature.

The price of a space heater ranges from $35 to $700, depending on its power and quality.

8. Water Heater

To make bathing, washing, and cooking more comfortable, water heaters are necessary.

The energy efficiency of your home is impacted by a variety of water heater types. For instance, conventional storage-tank heaters are preferred by many households because they offer an affordable price point for their efficient performance.

They continue to operate effectively in unexpected weather patterns, and because they are gas-powered, you can still access hot water if the power goes out due to storm warnings.

On the other hand, heat pumps and hybrid water heaters are only effective in cool climates. They require particular spatial circumstances to function well, are more expensive and difficult to install.

Although they cost less to operate than storage-tank heaters due to their reduced energy consumption.

The typical price of a water heater is between $300 and $2,000 per unit.

9. Gravity Air Furnace

In order to transfer hot air from one room to another, gravity air furnaces do just that. This heating system uses the way heat behaves to disperse it throughout the house. Since hot air rises, the furnace in the basement generates warm air that gravitates toward the vents where it may be expelled.

However, due to the uneven and fluctuating temperatures caused by the cold air eventually descending on your walls, these heating systems are rarely comfortable.

You must replace this inefficient system with a more contemporary heating system, which typically costs $9,000.

10. Heating With Electric Resistance

11 Types Of Heating Systems: What You Need To Know

This kind of heating system relies mostly on electricity, with high resistance conductors serving as a backup. There are four different kinds of electric resistance heating: thermal storage, baseboard heaters, wall heaters, and electric furnaces.

Baseboard heaters link to a central heating system by enclosing their heating elements in metal conduits. On the other hand, electric wall heaters have an electric heater embedded in a reflector in the wall.

This heating system’s installation would cost you between $2,000 and $2,500.

11. Fireplaces

Most fireplaces burn fuels like gas and biofuel, but some also use electricity, which is thought to be a safer option.

Electric fireplaces are considerably more economical, costing between $100 and $2,200, whereas wood-burning fireplaces cost between $1,900 and $5,600.

You would have to pay 50% of the cost for labor and installation.


For a home to be comfortable, a heating system is necessary. Your daily routine and productivity will be impacted by the effectiveness of your system, so be careful to pick one that will improve your experience even in severe weather patterns.

11 Types Of Heating Systems: What You Need To Know

What do you think?

Written by HVAC Contributor

Leave a Reply

Your email address will not be published. Required fields are marked *

GIPHY App Key not set. Please check settings

AC Heat Mode Isn't Working: Why And How To Fix It?

AC Heat Mode Isn’t Working: Why And How To Fix It?

Is It Good For The Furnace Vent To Be Sloped?

Is It Good For The Furnace Vent To Be Sloped?